Joyetech eGo AIO D22 XL Kit

4,295.00 3,195.00


Joyetech eGo AIO D22 XL Kit makes things as easy as it can be. The Compact easy to use, Leak Proof sub-ohm starter Kit from Joyetech. With Multi-Color LED illumination feature within the liquid chamber to know the remaining liquid level. This is an ideal kit for any level Vaper , easy to carry and can produce clouds of Vapor.

Item In Stock , Ships immediately.

Replacement Coils

To Purchase Spare Coils for this Device, Please – Click Here

Clear selection


1 x Joyetech eGo AIO D22 XL Body
2 x BF SS316-0.6ohm MTL Coil
2 x Mouthpiece
1 x USB Cable
1 x Quick Start Guide
1 x Warranty Card
1 x Waring Card

Joyetech eGo AIO D22 XL Kit


























How To Power on and off Joyetech eGo AIO D22 XL:

Press the fire button for 5 times in quick succession, the button light will flash 5 times to indicate eGo AIO D22 XL is ready for use. In the same way, the Joyetech eGo D22 XL will be powered off after 5 presses.

Atomizer coil replacement:

Press down and unscrew the top cap, the atomizer coil is attached to the lower part of the cap, just unscrew it and replace with a new one.


1. When you are using a new coil for the first time, please drip 5-7 drops of e-liquid inside the coil head, this will ensure the dry cotton inside is wet and prevent it from getting burnt out. This will ensure a good coil performance and enhance it’s life.
2. From time to time, condensation will tend to gather near the tip of the device as the vapor coming out will cool and form water droplets. keep tissue paper handy to dab off the excess liquid to continue enjoying a clean dry vape.

Filling e-Liquid:

Unscrew the top cap and fill the Atomizer chamber with your favourite e-liquid, make sure you do not fill above the mark.

Turn off or shift between the different colored lights:

In power-off condition, long press the fire button to turn off the indicate light or shift among the color of red, yellow, green, blue, indigo, white or purple or light-off.

Adjust the Air Inflow:

Try to keep the air inflow to the maximum by rotating the top cap on the Joyetech eGo D22 XL. Rotating the airflow ring clockwise or counterclockwise to adjust the air inlet.


Simply charge eGo AIO D22 XL by connecting it with a computer or a wall adapter via USB cable. When it’s fully charged, the button light will go out.

Choose Color

Full Black, Full Silver / Stainless


Joyetech eGo AIO D22 XL Kit